Beautiful

This tutorial was written by Kelli on 11/08/09.

Do not copy this tutorial or post through any kind of group

or claim it as your own.

Resemblance to any other tutorial is strictly coincidental.

This tutorial was written using psp 9,

but should work using any version.

It is written assuming you have a basic knowledge

of PSP and its tools.
Supplies Needed: ~ The Scrap kit By Babzy's boutique

called "Golden Bown"

it Can be purchased HERE

you can check out her blog HERE

~a tube of choice

~Font of choice

~my word art (Here) or one of choice

Ok......Ready?

1. Open the frame from the kit,resize it to 500 pixels x 500 pixels.Copy and paste it as a new image. Close the original. 2.Open a paper of choice and grab your crop tool, crop the paper to 500 x 500 pixels.Copy and paste it as a new layer, onto your working image.Drag it below the frame layer.

3.Open your tube. copy and paste it onto your paper tht you cropped, a large tube will work best.Merge visible and go to effects, image effects, offset set the vertival at 0and the horizontal as far to the right as it will go.so you have a nice striped pattern.

4.Copy the striped patern you just made.go back to your working image and activate the frame layer, make a new layer below your frame layer.grab your magic wand tool and click inside the frame.Expand your selection x 3 and paste into your new layer.Select none.

5.Now paste your tube onto your working image arrange it just above your frame layer, add a drop shadow of choice.Add our copywright info now.

7.Add your word art now.

8.Grab your text tool and type your name in your favorite font now, and add your faorite text effects,I just added a drop shadow.
9. Save it as a jpeg
Thanks for trying my tut!

Hugs from Kel

Give Thanks

This tutorial was written by Kelli on 11/07/09.

Do not copy this tutorial or post through any kind of group or

claim it as your own.

Resemblance to any other tutorial is strictly coincidental.

This tutorial was written using psp 9, but should work using any version. It is written assuming you have a basic knowledge of PSP and its tools.

Supplies Needed:

~ The Scrap kit By Staceys Designs called "Give Thanks "

it Can be purchased HERE or HERE

you can check out her blog HERE

~2 or 4 tubes of choice.I just used the clip art from the kit

~Font of choice

Ok......Ready?

1. Open the quad frame,Shif + D to dulicate it, close the original.Resize the frame image to 500 pixels tall.

2.Open a paper of choice and resize it to 500 tall.Copy and paste it as a new layer onto your frame image.

3.Grab your magic wand and click outside of the frame on all sides, so that all of the excess canvas on the frame layer is selected.Go to selections, expand by 6,now acivate the paper layer and hit delete on your keyboard to get rid of the paper outside of the frame.

4.Now activate your magic wand tool,nd click inside one of the frames,expand the selection x 5 Paste one of our tubes below the frame layer, go to selections and invert the selection.now hit delete on your keyboard.Repeat with the other frames.

5.Open the leaves png, copy and paste it onto your working image, drag it to the bottom, resize as desired, Move it to one side, Now duplicate it,flip and mirror the duplicate.Position it in the opposite corner of your image. 6.Open the give thanks pendant, reize it to an approprite size, copy and paste it onto your working image, position it in the middle of your image. Add a drop shadow of choice.

7.Grab your text tol and type your name, move it to the center of the pendant.

8.When happy with everything, save it as a png.

Thanks for trying my tut!

Hugs from Kel

quickpage

This tutorial was written by Kelli on 11/07/09. Do not copy this tutorial or post through any kind of group or claim it as your own. Resemblance to any other tutorial is strictly coincidental. This tutorial was written using psp 9, but should work using any version. It is written assuming you have a basic knowledge of PSP and its tools.

Supplies Needed:
~ The Scrap kit By Staceys Designs called "Tranquility" it Can be purchased HERE or HERE
you can check out her blog HERE
~3 Images of choice.I used 3 of my daughters pictures
~Fonts of choice

Ok......Ready?
1. Open one of the papers from the kit,resize it to 700 x700 pixels.
2.Open the braided ribbon from the kit resize it to 300 pixels wide.
Copy and paste it onto your working image.
Duplicate it and rotate the duplicated to the left x 90 degrees.
Position it so that it makes a corner.Merge down and duplicate again.Mirror and flip the dulicated so you have a frame.
Merge down and duplicate your frame twice. So you have 3,
Duplicate as many times as you like, its your quick page
lol
3.Rotate one of the frames left x 20.
leave one of them alone and rotate the last one to the right x 20.
Position as desired, refer to my image for placement.
4.Rotate one of them to the left by 20 and another one to the right by 20.
the other one stays as it is.
5.Open one of the doodles onto your working image, resize as desired.Change the blend mode to luminance.
6.Grab your maic wand and click inside one of the frames. Expand the selection by 3.
Add a new layer under your frame layer and paste into selection.
Do not deselect yet.
Add another new layer and paste another one of your images into selection.Add another new layer and paste your third image into selection.Now you can deselect.
7.Rotate one of the images to the left x 20 and one of them to the right x 20.Leave the third one as it is.Position them into your frames.
8.Add your text and your favorite text effects.
9.Add the other elements you are going to add to your quickpage. Add a drop shadow of choice.
Save as a jpeg,

Thanks for trying my tut!
Hugs from Kel

Tranquility

This tutorial was written by Kelli on 11/05/09.

Do not copy this tutorial or post through any kind of group or claim it as your own.

Resemblance to any other tutorial is strictly coincidental.

This tutorial was written using psp 9, but should work using any version. It is written assuming you have a asic knowledge of

PSP and its tools.

Supplies Needed: ~ The Scrap kit By Staceys Designs

called "Tranquility"

it Can be purchased HERE or HERE

you can check out her blog HERE

~a close up Tube of choice.I have included seeral in my supplies.

If you use the please abide by her tou which is icluded in the zip HERE

I used A free tube by a wonderful artist Patty Ann.
If you would like to see more of her work you can visit
Escape from Reality

~My supplies HERE

~a Font of choice

Ok......Ready?

1. Open a new canvas, 700 pixels wide x 30 tall.Transparent.

2.Open a paper of choice, paste it as a new layer onto your new canvas.

3.Now open 3 more papers of choice,Resize them to 300 tall.Open the braid from the kit and resize it to 300 pixels wide.Pasted it onto

your resize paper, duplicate it 3 times and frame your paper with the braids. Repeat on the other 2 papers.

Copy and paste them onto your woring image.

4.Rotate one of them to the left by 25 and anothe one to the right by 25.

the other one stays as it is.Position the papes as desired.Refer to my tag for placement.

5.Add the elements of choice, add a drop shadow to each.

6.Paste your tube of choice as a new layer and dont forget your copywright.If your using the tubes I supplied, please use (C)P.Ann.
7. Now add the text or my word art from the zip.

8.Add your name and your favorite text effects.

Save as a jpeg,

Thanks for trying my tut!

Hugs from Kel

every creature

This tutorial was written by Kelli on 11/05/09. Do not copy this tutorial or post through any kind of group or claim it as your own.
Resemblance to any other tutorial is strictly coincidental.
This tutorial was written using psp 9,
but should work using any version.
It is written assuming you have a
asic knowledge of PSP and its tools.

Supplies Needed:
~ The Scrap kit By
Crystals Cottage Scraps called
"Indian Treasures Tagger"
it Can be purchased HERE
you can check out her blog HERE
~aTube of choice.
I used A free tube by a wonderful artist SLY.

If you would like to see more of her work you can visit

Escape from Reality
~My supplies (Template) HERE~2 Fonts of choice
~Eyecandy 4000 Grad Glow (Optional)
~Penta color Dot(Optional)

Ok......Ready?

1. Open My template and delete the top layer with my info on it. 2.Starting on the bottom frame layer, go to layers, and select all select float and then defloat the selection.Now open a paper of choice, resize it to 500 pixels, copy it, go back to your working image and paste into selection.

3.Repeate step 2 on the rest of the layers of the template.

4.fill the outlines with a color that matches the paper you are using for that layer,I also added a blue grd glow on the outlines.

5.Add a new raster layer and drag it to the bottom of your layers palletteFill it with a gradient of your choice.I chose landscape and inverted it so the sky is at the topDuplicate this layer, add a texture effect to the duplicated layer, I also did this step on the small rectangles layer.I use Penta color dot with the default settings.

6.When you have all the template layers filled, copy and paste the rest of the elements you are going to use on your tag,Paste your tube and add your copywright.

7.Grab your text tool and find your font.Type your name in the font of choice, before converting to raster layer,go to objects convert text to curves, as character shapes.Now over on your layrs pallete, click the + beside the vector layer, and arrangeour name as desired.When happy with it convert to raster an aply a grad glow.

8. Choose another fnt and type your saying of choice.I googled the lyrics to the colors of the wind fro mPocohontuslol.Add your favorite text effects.

9.When happy with everything, save it as a jpeg.

Thanks for trying my tut! Hugs from Kel

Life & Love

This tutorial was written by Kelli on 11/02/09.

Do not copy this tutorial or post through any kind of group or claim it as your own.

Resemblance to any other tutorial is strictly coincidental.

This tutorial was written using psp 9, but should work using any version. It is written assuming you have a basic knowledge of PSP and its tools.

Supplies Needed:

~ The Scrap kit By Pspgirl called "Love&Passion "

it Can be purchased HERE

you can check out her blog HERE

~Tube of choice.I used A free tube by a wonderful artist

Patty Ann.If you would like to see more of her work you can visit

Escape from Reality

~My supplies (Word art and Template) HERE

~a Font of choice

Ok......Ready?
1. Open My template and delete the top layer with my info on it. 2.Starting on the bottom frame layer, go to layers, and select all select float and then defloat the selection.Now open a paper of choice, resize it to 500 pixels, copy it, go back to your working image and paste into selection.
3.Repeate step 2 on the rest of the layers of the template.
4.I deleted the circle layer on my template and used the beautiful circle frame from he kit.
5.Make the frames layer active, grab your magic wand and click inside both frames, expand the selecton x 5 paste a light colored paper into selection, select none.Now go to adjust, and sharpen all your paper layers.
5.When you have all the template layers filled, copy and paste the rest of the elements you are going to use on your tag,Paste your tube and add your copywright.
6.Open my word art, and the flower you are going to use with it.Resize the flower to an appropriate size to fit inside the word art.When happy with it, copy and paste it as a new layer, position it inside one of the small frames.
7. Choose your text tool, and add your name in you choice of font, add your favorite text effects.
8.When happy with everything, save it as a png.

Thanks for trying my tut!
Hugs from Kel

Love & Chocolate

This tutorial was written by Kelli on 11/01/09.

Do not copy this tutorial or post through any kind of group or claim it as your own.

Resemblance to any other tutorial is strictly coincidental.

This tutorial was written using psp 9, but should work using any version.

It is written assuming you have a basic knowledge of PSP and its tools.

Supplies Needed: ~ The Scrap kit By Pspgirl called "Love&Passion "

it Can be purchased HERE

you can check out her blog HERE

~Tube of choice...I used A tube by Keith Garvey.

You must purchase a license to use his work.

You can get one at MPT

~2 Fonts of choice

~eyecandy grad glow

~Mask of choice or this one:

(I m sorry I dont know where I got this mask,

If it is yours please let me know

and I will give credit or take it down)

Ok......Ready?
1. Open a new image 700 pixels wide x 320 pixels high.
2.Open frame of choice, Resize it as needed, Paste it onto your working image,rotate it by 25 degrees to the left.Resize it to fit nicely into your tag.When it is the right size duplicate it and mirror the duplicate.Duplicate again, rotate it as above,position all three frames, refer to my tag for placement.
3.Grab your magic wand tool and click inside the middle frame.Modify the selection by expanding the selection x 20 pixels, add a new layer below the frame layer and paste a paper of choice into selection,(I resized the paper to 500 pixels before coying it).Select none.Duplicate the layer,rotate it as above.Position it under the left frame,Duplicate it and mirror it, now you should have a paper under each of the frames.Merge the frame and paper layers so you dont have so may layers.
4.Now open another paper of choice, resize it to 300 pixels, Open your mask of choice, or the one I have provided.Apply your mask to the paper you just opened.Merge group.Copy and paste it onto your working image.Position it in one corner,Duplcate it and mirror the duplicate.Now duplicate again and position the new dulicated layer in the middle of the tag.Grab your deform tool and rotate it to the left until it looks straight.Refer to my tag if needed.
5.Merge the three mask layers, when they are positioned as desired.
6.Open the element75.Resize it x 75%.Copy and paste it onto your working image.Drag it above the mask layer,and just below your frame layer. Add the candy bar on top of your frame layer, use your deform tool to rotate it.Paste your tube of choice.And add Copywright.

7.Open the other elements you are going to use on your tag.Resize them, and paste them onto your ta.

Add a drop shadow to each element, Scatter the Chocolate chips around your tag.
8. Choose your text tool, and one of the fonts you are going to use. Type your text, I did "All I really need is love but a little chocolate now and then doesnt hurt",Convert to Raster layer and add a white grad glow.Repeat the grad glow with a brown from the chocolate.I also added a white grad glow to the copywright layer.
9.Now choose your other font and type your name.Add the same grad glow you used for the prevous text.
10.When happy with everything, save it as a jpeg.
Thanks for trying my tut!
Hugs from Kel